Winter Plus Energy Building Sol’CH

Via dal Solch, Poschiavo, Switzerland

Function
Residential
IPV Architectural elements
Opaque roof | Rainscreen | Opaque façade | Tiles, shingles and slates | Cladding
PV Integration Year
between 2021 and 2025
Source
BIPV meets History project

Project Data

Project type
New construction
Heritage constraint
Conservation area
PV integration year
2021

IPV System Data

Module technology
Module dimensions (mm)
several
System power (kWp)
34 (roof), 31.6 (façade)
System area (m²)
187 (roof), 284 (façade)
Modules orientation
West, South, East, North
Modules tilt [°]
35, 55, 90
Annual electricity production (kWh)
47,770
Coverage of electric consumption [%]
600

Information and data provided by: Nadia Vontobel Architekten GmbH

Introduction

The Sol’CH project is a BIPV building that is a model in terms of energy, with high-quality architecture that blends harmoniously into the landscape and the urban area. The idea to design the entire envelope with integrated photovoltaic modules had a significant influence on the shape of the new building. It was designed to obtain a south-facing roof with an ideal inclination of 35 degrees, and a south-facing facade with a large surface area for the production of electricity during the winter. A particular characteristic of the Sol’CH project is the energetic use of the north facade and roof, which enhances the overall architectural expression of the building and at the same time contributes to the generation of electricity. The Canton of the Grisons recognised the Sol’CH project, the only one of its kind in Switzerland, as a pilot project, and intends to publish the experience gained during the construction process as well as the monitoring data gathered from the system over the first few years of operation. Furthermore, the project respects all the directives of the Minergie-P and Minergie-A labelling system and has received the relative certification.

Aesthetic integration

The dark matte surface of the photovoltaic façades in shades of anthracite and brown contribute to the building’s blending into the surrounding landscape. The surface of the modules was chosen with a degree of transparency that allows the individual silicon cells to be seen up close, but at the same time creates a homogeneous and matte surface from distance. The shape of the building and the colour of the photovoltaic modules changes according to the point of view and the angle of incidence of the light.

Technology integration

The BIPV modules serve as both an envelope for the building and for the production of electricity.

Energy integration

The BIPV system produces 47,770 kWh per year, approximately five times the energy requirements of the home. The energy requirements for appliances, lighting, heating and hot water are extremely low thanks to the 26-cm insulation in the walls and the roof, the use of an efficient heat pump, class-A appliances and LED lighting. Heating and hot water supply is fed by a 3000-l storage tank. Furthermore, in the future it will be possible to use a portion of the electricity produced for the bidirectional charging of electric vehicles, for which two connection points have been set up. The remaining portion is fed back into the local grid.

Decision making

The initial idea for the design was that every façade and section of the roof of a new building can also be used to generate electricity as well as serve as an envelope for the building.

Lessons learnt

One important challenge was to find producers of photovoltaic modules that were prepared to work with us in developing modules of differing shape and colour, as well as a suitable support structure. To identify solutions that are viable from an architectural point of view in the field of BIPV, it is necessary to establish a solid dialogue with suppliers in terms of surfaces, installation and all the details regarding connections. From the outset, it was essential for the entire construction process to be carried out with the utmost precision. This was a challenge for all the companies involved, but the greatest challenge was coordinating the various operations. The project developed contributes to the development of solar energy use, focuses on architectural aspects, and demonstrates what is currently possible from a technical and aesthetic point of view.

Modules involved

All modules

Architectural Elements involved

Stakeholders involved

Caotec SA
IPV installer
Sunage SA
IPV producer
Contact us

Get expert support to design, evaluate or validate your IPV projects

Contact us now
Icon for join the community